Service Emploi spécialisé depuis 27 ans
Pour être rappelé, indiquez votre numéro de téléphone.
Né le 20/01/2003
75000 Paris
0 à 1 an d'expérience
Réf : 2607161409
Aerospace Engineer
Ma recherche
Je recherche tout type de contrat, sur toute la région Ile de France, dans le Batiment.
Formations
12/2026 : Bac +5 - IPSA Paris
Engineering Cycle - AERO 4 & 5 in Aerospace Propulsion Thesis: Numerical Modeling of Thermal CVD Carbon Deposition from Methane (CH4) on a Graphite Substrate. Supervisor: Dr. Thanh‑Ha Nguyen‑Bui, Safran - CNRS - Laboratoire LTCS, Université de Bordeaux. Erasmus exchange (6 months) at University of Pisa.
Engineering Cycle - AERO 4 & 5 in Aerospace Propulsion Thesis: Numerical Modeling of Thermal CVD Carbon Deposition from Methane (CH4) on a Graphite Substrate. Supervisor: Dr. Thanh‑Ha Nguyen‑Bui, Safran - CNRS - Laboratoire LTCS, Université de Bordeaux. Erasmus exchange (6 months) at University of Pisa.
12/2024 : Bac +3 - IPSA Paris
Engineering Cycle - AERO 3 in Aeronautics Thesis: Validation of CFD Models for Metal Oxide Nanoparticle Formation in Droplet Combustion. Supervisor: Dr. Benedetta Franzelli, Laboratoire EM2C - CNRS - CentraleSupélec, Université Paris‑Saclay.
Engineering Cycle - AERO 3 in Aeronautics Thesis: Validation of CFD Models for Metal Oxide Nanoparticle Formation in Droplet Combustion. Supervisor: Dr. Benedetta Franzelli, Laboratoire EM2C - CNRS - CentraleSupélec, Université Paris‑Saclay.
12/2023 : Bac +2 - Académie de Lille - Lycée Colbert (Tourcoing)
Prépa CPGE - TSI
Prépa CPGE - TSI
12/2021 : Bac - Académie de Lille - Lycée Colbert (Tourcoing)
Technological Baccalaureate
Technological Baccalaureate
Expériences professionnelles
02/2026 - 09/2026 : Aerospace Engineering Intern chez Safran - Cnrs - Laboratoire Ltcs, Pessac
Configuration of a numerical model in FreeFem++ for simulating a chemical vapor deposition reactor, coupling heat transfer, fluid flow, species transport, surface reaction kinetics, and carbon deposition on silicon substrates; validation using experimental and literature data.
Configuration of a numerical model in FreeFem++ for simulating a chemical vapor deposition reactor, coupling heat transfer, fluid flow, species transport, surface reaction kinetics, and carbon deposition on silicon substrates; validation using experimental and literature data.
06/2025 - 09/2025 : Aeronautical Engineering Intern chez Laboratoire Em2c - Cnrs - Centralesupélec, Paris
Development and validation of CFD models for metal‑oxide nanoparticle production via isolated droplet combustion, using OpenSMOKE++ simulations and parametric analysis; numerical predictions validated against experimental data from the University of Bremen.
Development and validation of CFD models for metal‑oxide nanoparticle production via isolated droplet combustion, using OpenSMOKE++ simulations and parametric analysis; numerical predictions validated against experimental data from the University of Bremen.
05/2024 - 06/2024 : Aerospace Engineering Intern chez Dart - Deep‑space Astrodynamics Research & Technology Group, Milan
Modeling of thermo‑acoustic instabilities in sub‑scale ramjet combustion chambers; analysis of coupling between unsteady heat release and acoustic wave propagation; parametric study of injector layout, chamber design and flow conditions to identify dominant instability modes.
Modeling of thermo‑acoustic instabilities in sub‑scale ramjet combustion chambers; analysis of coupling between unsteady heat release and acoustic wave propagation; parametric study of injector layout, chamber design and flow conditions to identify dominant instability modes.
Langues
Italian (Oral : maternelle / Ecrit : expérimenté), French (Oral : maternelle / Ecrit : expérimenté), English (Oral : maternelle / Ecrit : expérimenté), Spanish (Oral : courant / Ecrit : intermédiaire)
Atouts et compétences
Computational Fluid Dynamics (CFD), Aerodynamics, Propulsion Systems, Combustion Modeling, Heat and Mass Transfer, Aircraft Systems, Embedded Electrical & Avionics Systems, Electrical Wiring Interconnection Systems (EWIS), CAD/CAE (CATIA, SolidWorks, ANSYS, Abaqus, MSC Nastran/Patran), Programing Languages (Python, MATLAB, C/C++, Fortran, Modelica, Ada, VHDL, Assembly, Java, Julia, R, SQL, CUDA), Linux/Unix, Simcenter STAR‑CCM+, Simulink, OpenSMOKE++, FreeFem++