Service Emploi spécialisé depuis 27 ans
Pour être rappelé, indiquez votre numéro de téléphone.
Né le 01/01/1980
Mahdia
Plus de 10 ans d'expérience
Réf : 260921133132
Electrical Et Instrumentation Technician
Ma recherche
Je recherche tout type de contrat, dans toute la France, dans le Batiment.
Formations
12/2003 : Bac +2 - Centre Sectoriel de Formation en Électronique, Sakiet Ezzit, Sfax
Industrial Electronics Technician – Brevet de Technicien Professionnel
Industrial Electronics Technician – Brevet de Technicien Professionnel
12/2001 : Bac - Lycée 18 Janvier, Jebeniana
Baccalauréat – Section Technique
Baccalauréat – Section Technique
Expériences professionnelles
02/2025 - à ce jour : E&I Technician chez Gets Company – Hib, HIB
Conducted comprehensive E&I condition assessments on sewage pump stations and treatment plants; inspected MV/LV switchgear, MCC, transformers, cable trays, conduits and earthing; performed cable testing, generator set tests, motor tests; verified field instrumentation; compiled structured assessment reports with recommendations.
Conducted comprehensive E&I condition assessments on sewage pump stations and treatment plants; inspected MV/LV switchgear, MCC, transformers, cable trays, conduits and earthing; performed cable testing, generator set tests, motor tests; verified field instrumentation; compiled structured assessment reports with recommendations.
01/2024 - 02/2025 : E&I Technician chez Gets Company – Brega Oil
Executed maintenance, repair and calibration campaign on three spherical LPG tanks; installed pressure gauges, transmitters, radar level gauges and multi‑spot temperature transmitters; replaced instrumentation cabling and performed loop verification; delivered calibration certificates and as‑built mark‑ups.
Executed maintenance, repair and calibration campaign on three spherical LPG tanks; installed pressure gauges, transmitters, radar level gauges and multi‑spot temperature transmitters; replaced instrumentation cabling and performed loop verification; delivered calibration certificates and as‑built mark‑ups.
12/2022 - 12/2023 : E&I Technician chez Gets Company – Petrofac
Reviewed IFC documents, followed ITPs and MIRs, raised RFIs, performed MV/LV cable pulling and testing, installed cathodic protection, installed and tested transformer rectifiers, flagged NCRs and supported corrective actions.
Reviewed IFC documents, followed ITPs and MIRs, raised RFIs, performed MV/LV cable pulling and testing, installed cathodic protection, installed and tested transformer rectifiers, flagged NCRs and supported corrective actions.
10/2020 - 06/2022 : E&I Technician chez Oil & Gas Service Company (seip)
Contributed to Project Quality Plan, followed QA/QC schedule, managed material handling, coordinated installation packages, compiled FAT/SAT reports, installed conduit, cable‑trays, transformers, HV switchgear, UPS, grounding, and field instrumentation; performed calibration and pneumatic leak testing.
Contributed to Project Quality Plan, followed QA/QC schedule, managed material handling, coordinated installation packages, compiled FAT/SAT reports, installed conduit, cable‑trays, transformers, HV switchgear, UPS, grounding, and field instrumentation; performed calibration and pneumatic leak testing.
07/2018 - 03/2020 : E&I Commissioning Technician chez Spiecapag / Imi
Supervised installation activities, performed grounding checks, erected and terminated process and safety instruments, supervised cable laying, pre‑commissioned E&I cables, calibrated instruments, commissioned diesel generators, LV panels, UPS systems, fire & gas systems and field instruments; established Modbus and PROFIBUS communications.
Supervised installation activities, performed grounding checks, erected and terminated process and safety instruments, supervised cable laying, pre‑commissioned E&I cables, calibrated instruments, commissioned diesel generators, LV panels, UPS systems, fire & gas systems and field instruments; established Modbus and PROFIBUS communications.
02/2018 - 05/2018 : E&I Technician chez Geis – Al Waha / Omv
Verified skid arrival against vendor drawings, checked nameplates, inspected skid for transport damage, performed motor megger tests, verified MCC interfaces, earthing and bonding, and inspected instrumentation installations.
Verified skid arrival against vendor drawings, checked nameplates, inspected skid for transport damage, performed motor megger tests, verified MCC interfaces, earthing and bonding, and inspected instrumentation installations.
08/2017 - 01/2018 : Instrumentation Technician chez Kde Technologie
Read and interpreted electrical diagrams; maintained hydraulic/pneumatic control panels; verified SSV/SDV solenoid function; performed motor terminations and testing; calibrated level, pressure and temperature transmitters; verified 4–20 mA loop integrity and HART communication.
Read and interpreted electrical diagrams; maintained hydraulic/pneumatic control panels; verified SSV/SDV solenoid function; performed motor terminations and testing; calibrated level, pressure and temperature transmitters; verified 4–20 mA loop integrity and HART communication.
04/2017 - 06/2017 : E&I Technician chez Al Rida Oil Service
Installed cable trays, flow, temperature and pressure transmitters, and associated junction boxes; performed glanding and termination of instrument cables; pre‑commissioned E&I cables (IR and continuity tests).
Installed cable trays, flow, temperature and pressure transmitters, and associated junction boxes; performed glanding and termination of instrument cables; pre‑commissioned E&I cables (IR and continuity tests).
08/2016 - 10/2016 : Electrical Technician chez Eni Gaz – Medco Oil Service
Wired electrical cabinets and installed measuring instruments; installed cable trays and performed cable pulling, dressing, glanding and termination for lighting panels, DBs, junction boxes and control panels; performed IR and Hi‑Pot testing of power cables and transformer testing (vector‑group, BDV, turns‑ratio, etc.).
Wired electrical cabinets and installed measuring instruments; installed cable trays and performed cable pulling, dressing, glanding and termination for lighting panels, DBs, junction boxes and control panels; performed IR and Hi‑Pot testing of power cables and transformer testing (vector‑group, BDV, turns‑ratio, etc.).
10/2014 - 01/2016 : Electrical Technician chez El Nasser Contractors, Jerba
Performed IR and continuity testing of control and power cables; replaced the electrical control cabinet for the four ship engines; installed lighting, fire‑detection equipment and alarm systems in the control and engine rooms; repaired and reorganised wheel‑house equipment.
Performed IR and continuity testing of control and power cables; replaced the electrical control cabinet for the four ship engines; installed lighting, fire‑detection equipment and alarm systems in the control and engine rooms; repaired and reorganised wheel‑house equipment.
10/2008 - 02/2011 : E&I Technician chez Joannou & Paraskevaides (j&p)
Installed and calibrated flow, temperature, pressure, and level transmitters, vibration sensors, control valves, and MOV actuators; performed pre‑commissioning cable IR/continuity checks and witnessed grounding/earthing system testing.
Installed and calibrated flow, temperature, pressure, and level transmitters, vibration sensors, control valves, and MOV actuators; performed pre‑commissioning cable IR/continuity checks and witnessed grounding/earthing system testing.
02/2006 - 06/2008 : Elevator Technician chez Sme Elevator Company
Assembled, installed, repaired, and maintained elevators and stairlifts; adjusted safety controls, counterweights, and door mechanisms; performed scheduled preventive maintenance on construction sites.
Assembled, installed, repaired, and maintained elevators and stairlifts; adjusted safety controls, counterweights, and door mechanisms; performed scheduled preventive maintenance on construction sites.
Langues
Arabic (Oral : maternelle / Ecrit : expérimenté), English (Oral : courant / Ecrit : intermédiaire), French (Oral : courant / Ecrit : intermédiaire), Italian (Oral : notions / Ecrit : débutant)
Atouts et compétences
Electrical & Power HV/MV/LV switchgear, MCC & transformer testing, Motor testing (IR, winding resistance, rotation), Cable installation, glanding, termination & testing, Cathodic protection (ICCP & galvanic), Instrument calibration & loop checking, Field instrumentation (PT, TT, FT, LT, control valves), DCS/PLC loop checking & commissioning, Radar tank gauging (FMCW) & MSTT systems, Fire & gas, ESD/SIS function testing, Hazardous area compliance (ATEX/IECEx), IEC standards (60364, 61439, 60947, 62271, 61511), ISO 9001:2015 quality procedures, ITP/ITR execution, FAT/SAT support & punch‑list closure, NCR reporting & corrective‑action support, As‑built mark‑ups & completion dossiers, Project planning & coordination, Team supervision & training
Permis
Permis B